bladeRF-cli for 2.0 micro

Having issues with the site, hardware, source code, or any other issues?
Post Reply
OSQZSS
Posts: 1
Joined: Sun Jun 14, 2015 6:23 am

bladeRF-cli for 2.0 micro

Post by OSQZSS »

How can I select the TX/RX channel of the bladeRF 2.0 micro with bladeRF-cli?
User avatar
rtucker
Posts: 77
Joined: Sun Jan 25, 2015 10:38 am

Re: bladeRF-cli for 2.0 micro

Post by rtucker »

"rx config channel=1" would select RX1, "tx config channel=2" would select TX2, etc. You can also "channel=1,2" to select both ports.

Hope this helps :)
Rey Tucker (she/her)
Systems Engineer, Nuand LLC
Rochester, NY, USA

#WontBeErased
Post Reply