xb300

Discussions related to schematic capture, PCB layout, signal integrity, and RF development

Moderator: robert.ghilduta

Post Reply
jadona
Posts: 3
Joined: Thu Sep 15, 2016 11:36 am

xb300

Post by jadona » Wed Jan 04, 2017 1:42 pm

I was looking at the xb 300 code, I could only find functions to enable and attach the xb 300 expansion board. The RF frontends of the basic board are connected to the RXIF and TXIF of the XB300. My question is if the output of the frontend is already modulated. How can the ADC/DAC on the XB300 work on that frequency ?

bglod
Posts: 180
Joined: Thu Jun 18, 2015 6:10 pm

Re: xb300

Post by bglod » Fri Dec 01, 2017 2:23 pm

The XB-300 is an amplifier board. There's a PA for transmit, and an LNA for receive. The ADC on the XB-300 just converts the PA's power detect voltage to a digital value that can be interpreted by the FPGA/host.
Electrical Engineer
Nuand, LLC.

Post Reply