BladeRF + osmocom
-
- Posts: 3
- Joined: Mon Oct 15, 2018 8:33 am
BladeRF + osmocom
Can someone tell if it's actualy possible to run a GSM/GPRS Network with BladeRF and Osmocom software(osmoNITB, osmoGGSN, etc..)?
-
- Posts: 201
- Joined: Thu Jun 18, 2015 6:10 pm
Re: BladeRF + osmocom
YateBTS currently works with the bladeRF x115 and x40, provided you are using FPGA v0.1.2. The folks over at Yate are completely rewriting their support for bladeRF so when it's eventually released, it will link against libbladeRF and you'll no longer be tied to specific FPGA/firmware versions. That's really all I know about this topic, unfortunately.
Electrical Engineer
Nuand, LLC.
Nuand, LLC.
-
- Posts: 3
- Joined: Mon Oct 15, 2018 8:33 am
Re: BladeRF + osmocom
ty for reply, i'm waiting for someone that could help me.
This is lack of feature, maybe from osmocom not from nuand.
Best regards
John
This is lack of feature, maybe from osmocom not from nuand.
Best regards
John
-
- Posts: 201
- Joined: Thu Jun 18, 2015 6:10 pm
Re: BladeRF + osmocom
I'm not sure if you saw this, but we have an unofficial YateBTS that supports bladeRF2: http://nuand.com/forums/viewtopic.php?f=5&t=5094
Electrical Engineer
Nuand, LLC.
Nuand, LLC.