Windows installer
-
- Posts: 9
- Joined: Sat Sep 14, 2013 7:02 am
Windows installer
Help required. Installed the latest windows installer but the driver is not functioning. Running Windows 7 x64. Device manage reports that libusbK USB Devices bladeRF has a code 10. This device cannot start. I have not do anything to the firmware - as received. I have ried to use Zadig but only the win32 drivers seem to install ok but the B|lade-cli can see the device but has errors opening the device. Any help greatly appreciated
-
- Posts: 12
- Joined: Thu Oct 17, 2013 6:16 pm
Re: Windows installer
I am now using the windows xp,and successfully tx and rx by using the bladerf-cli.
-
- Posts: 2
- Joined: Tue Dec 17, 2013 2:55 pm
Re: Windows installer
I was having a similar issue and needed to update the firmware to the latest. Also dont forget to reset the device after updating.orangepeel wrote:Help required. Installed the latest windows installer but the driver is not functioning. Running Windows 7 x64. Device manage reports that libusbK USB Devices bladeRF has a code 10. This device cannot start. I have not do anything to the firmware - as received. I have ried to use Zadig but only the win32 drivers seem to install ok but the B|lade-cli can see the device but has errors opening the device. Any help greatly appreciated
For testing I was using sdr-radio.