Having issues with the site, hardware, source code, or any other issues?
habib
Posts: 11 Joined: Tue Dec 16, 2014 1:36 am
Post
by habib » Mon Dec 22, 2014 7:35 am
Hi
i am using ubuntu 14.04. the bladerf version and info is given bellow.
Code: Select all
bladeRF> version
bladeRF-cli version: 1.0.0-git-2864bcc
libbladeRF version: 1.0.0-git-2864bcc
Firmware version: 1.8.0
FPGA version: 0.1.2
bladeRF> info
Serial #: bf922ab76ae11915ff145093139e3eb7
VCTCXO DAC calibration: 0x8914
FPGA size: 115 KLE
FPGA loaded: yes
USB bus: 2
USB address: 9
USB speed: Hi-Speed
Backend: libusb
Instance: 0
For solving the following problem in yatebts
Code: Select all
2014-12-19_06:58:35.905683 <transceiver:MILD> bladeRFDevice.cpp:489:readSamples: RX Timestamp jumped by 4222184780922892 at 1 in buffer 0/4
2014-12-19_06:58:35.905738 <transceiver:MILD> bladeRFDevice.cpp:489:readSamples: RX Timestamp jumped by 3659239122566928 at 253 in buffer 1/4
2014-12-19_06:58:35.905782 <transceiver:MILD> bladeRFDevice.cpp:489:readSamples: RX Timestamp jumped by 4081445145214486 at 505 in buffer 2/4
2014-12-19_06:58:35.905821 <transceiver:MILD> bladeRFDevice.cpp:489:readSamples: RX Timestamp jumped by 3237018067598617 at 757 in buffer 3/4
2014-12-19_06:58:35.905848 <transceiver:MILD> bladeRFDevice.cpp:489:readSamples: RX Timestamp jumped by 3518495191858205 at 1009 in buffer 0/4
2014-12-19_06:58:35.905896 <transceiver:MILD> bladeRFDevice.cpp:489:readSamples: RX Timestamp jumped by 3659234827696928 at 1261 in buffer 1/4
i tried patch this file(
http://pastebin.com/G1Y32Z9a ) with the suggestion of Jynik (more info
http://nuand.com/forums/viewtopic.php?f=4&t=3665 ) .But the problem is
Code: Select all
sudo patch < G1Y32Z9a.txt
(Stripping trailing CRs from patch; use --binary to disable.)
patching file bladeRFDevice.cpp
patch unexpectedly ends in middle of line
Hunk #3 succeeded at 185 with fuzz 1.
Now i am trying to find out the solution .Any help would be appreciated .Thanks
habib
Posts: 11 Joined: Tue Dec 16, 2014 1:36 am
Post
by habib » Mon Dec 22, 2014 11:11 pm
ya solve the problem. just have to software update. thanks eveyone
mohitchichi88
Posts: 3 Joined: Mon Sep 03, 2018 4:13 am
Post
by mohitchichi88 » Mon Sep 03, 2018 4:16 am
i am getting this as a problem in my yate
when i run yate -s by Led 2 starts blinking but i cant see any network. i am tring to setup yatebts on a linux system,
i am using bladerf 115x
mohit@mohit-virtual-machine:/var/www/html$ sudo bladeRF-cli -i
bladeRF> version
bladeRF-cli version: 1.6.1-2018.08-release-1-ppaxenial
libbladeRF version: 2.0.2-2018.08-release-1-ppaxenial
Firmware version: 2.0.0
FPGA version: 0.7.3
------------------------------------------------------------------------------------------------------------------------------------------------------------------
2018-09-03_16:41:47.302541 <bladerf/1:NOTE> RX: timestamp adjusted by 423 to 317477851 [0x7f68bc000eb0]
2018-09-03_16:41:47.303553 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317480287/672 [0x7f68bc000eb0]
2018-09-03_16:41:47.303602 <bladerf/1:NOTE> RX: timestamp adjusted by 420 to 317480287 [0x7f68bc000eb0]
2018-09-03_16:41:47.304786 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317482995/944 [0x7f68bc000eb0]
2018-09-03_16:41:47.304831 <bladerf/1:NOTE> RX: timestamp adjusted by 692 to 317482995 [0x7f68bc000eb0]
2018-09-03_16:41:47.306026 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317485474/715 [0x7f68bc000eb0]
2018-09-03_16:41:47.306055 <bladerf/1:NOTE> RX: timestamp adjusted by 463 to 317485474 [0x7f68bc000eb0]
2018-09-03_16:41:47.307223 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317488141/903 [0x7f68bc000eb0]
2018-09-03_16:41:47.307272 <bladerf/1:NOTE> RX: timestamp adjusted by 651 to 317488141 [0x7f68bc000eb0]
2018-09-03_16:41:47.308377 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317490534/629 [0x7f68bc000eb0]
2018-09-03_16:41:47.308424 <bladerf/1:NOTE> RX: timestamp adjusted by 377 to 317490534 [0x7f68bc000eb0]
2018-09-03_16:41:47.309704 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317493177/879 [0x7f68bc000eb0]
2018-09-03_16:41:47.309825 <bladerf/1:NOTE> RX: timestamp adjusted by 627 to 317493177 [0x7f68bc000eb0]
2018-09-03_16:41:47.310770 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317495701/760 [0x7f68bc000eb0]
2018-09-03_16:41:47.310820 <bladerf/1:NOTE> RX: timestamp adjusted by 508 to 317495701 [0x7f68bc000eb0]
2018-09-03_16:41:47.312001 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317498333/868 [0x7f68bc000eb0]
2018-09-03_16:41:47.312036 <bladerf/1:NOTE> RX: timestamp adjusted by 616 to 317498333 [0x7f68bc000eb0]
2018-09-03_16:41:47.313393 <gsmtrx:MILD> Transmit underrun by 3 timeslots [0x7f68bc027150]
2018-09-03_16:41:47.313439 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317500986/889 [0x7f68bc000eb0]
2018-09-03_16:41:47.313474 <bladerf/1:NOTE> RX: timestamp adjusted by 637 to 317500986 [0x7f68bc000eb0]
2018-09-03_16:41:47.314526 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317503634/884 [0x7f68bc000eb0]
2018-09-03_16:41:47.314573 <bladerf/1:NOTE> RX: timestamp adjusted by 632 to 317503634 [0x7f68bc000eb0]
2018-09-03_16:41:47.316215 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317506139/741 [0x7f68bc000eb0]
2018-09-03_16:41:47.316286 <bladerf/1:NOTE> RX: timestamp adjusted by 489 to 317506139 [0x7f68bc000eb0]
2018-09-03_16:41:47.318258 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317508812/909 [0x7f68bc000eb0]
2018-09-03_16:41:47.318310 <bladerf/1:NOTE> RX: timestamp adjusted by 657 to 317508812 [0x7f68bc000eb0]
2018-09-03_16:41:47.319209 <bladerf/1:MILD> RX buf_samples=252: 8 buffers: invalid timestamps (buf=ts/delta) 6=317511501/925 [0x7f68bc000eb0]
bglod
Posts: 201 Joined: Thu Jun 18, 2015 6:10 pm
Post
by bglod » Tue Sep 04, 2018 11:44 am
Yate requires a very specific FPGA version -- 0.1.2. Please try that first.
Electrical Engineer
Nuand, LLC.
mohitchichi88
Posts: 3 Joined: Mon Sep 03, 2018 4:13 am
Post
by mohitchichi88 » Fri Mar 27, 2020 11:25 am
Unable to do it any update on this error above