bladeRF-cli for 2.0 micro

Having issues with the site, hardware, source code, or any other issues?

Moderator: robert.ghilduta

Post Reply
OSQZSS
Posts: 1
Joined: Sun Jun 14, 2015 6:23 am

bladeRF-cli for 2.0 micro

Post by OSQZSS » Sun Sep 30, 2018 9:10 pm

How can I select the TX/RX channel of the bladeRF 2.0 micro with bladeRF-cli?

User avatar
rtucker
Posts: 77
Joined: Sun Jan 25, 2015 10:38 am

Re: bladeRF-cli for 2.0 micro

Post by rtucker » Tue Oct 02, 2018 12:25 pm

"rx config channel=1" would select RX1, "tx config channel=2" would select TX2, etc. You can also "channel=1,2" to select both ports.

Hope this helps :)
Rey Tucker (she/her)
Systems Engineer, Nuand LLC
Rochester, NY, USA

#WontBeErased

Post Reply