VirtualBox: No bladeRF device(s) available.
Posted: Wed Jul 20, 2016 2:58 pm
Hello,
I am using VirtualBox on a MAC (El Capitan version 10.11.5), but I cannot get the board connected.
This is what I get:
=============
[admin@SDR ~]$ bladeRF-cli -i -v verbose
[VERBOSE @ libusb.c:541] Using libusb version: 1.0.15.10646
[DEBUG @ libusb.c:210] Failed to get configuration descriptor: LIBUSB_ERROR_IO
[DEBUG @ libusb.c:550] No devices available on the libusb backend.
No bladeRF device(s) available.
If one is attached, ensure it is not in use by another program
and that the current user has permission to access it.
=============
I cannot figure out which is the problem. If anyone has some clues, please let me know.
I have checked the "Enable USB Controller" and "Enable USB 2.0 (EHCI) Controller" options under a VM's USB settings.
With USB 3.0 option the same is happening.
Also, the groups seem fine:
[admin@SDR ~]$ groups
admin wheel bladerf
Thank you for your help.
Nicolae
I am using VirtualBox on a MAC (El Capitan version 10.11.5), but I cannot get the board connected.
This is what I get:
=============
[admin@SDR ~]$ bladeRF-cli -i -v verbose
[VERBOSE @ libusb.c:541] Using libusb version: 1.0.15.10646
[DEBUG @ libusb.c:210] Failed to get configuration descriptor: LIBUSB_ERROR_IO
[DEBUG @ libusb.c:550] No devices available on the libusb backend.
No bladeRF device(s) available.
If one is attached, ensure it is not in use by another program
and that the current user has permission to access it.
=============
I cannot figure out which is the problem. If anyone has some clues, please let me know.
I have checked the "Enable USB Controller" and "Enable USB 2.0 (EHCI) Controller" options under a VM's USB settings.
With USB 3.0 option the same is happening.
Also, the groups seem fine:
[admin@SDR ~]$ groups
admin wheel bladerf
Thank you for your help.
Nicolae