bladeRF-cli for 2.0 micro
-
- Posts: 1
- Joined: Sun Jun 14, 2015 6:23 am
bladeRF-cli for 2.0 micro
How can I select the TX/RX channel of the bladeRF 2.0 micro with bladeRF-cli?
- rtucker
- Posts: 77
- Joined: Sun Jan 25, 2015 10:38 am
Re: bladeRF-cli for 2.0 micro
"rx config channel=1" would select RX1, "tx config channel=2" would select TX2, etc. You can also "channel=1,2" to select both ports.
Hope this helps
Hope this helps
Rey Tucker (she/her)
Systems Engineer, Nuand LLC
Rochester, NY, USA
#WontBeErased
Systems Engineer, Nuand LLC
Rochester, NY, USA
#WontBeErased