Generate BSP errors

[TobyXue]

Hello all,

I was trying to measure the code execution time inside of the Nios II, thus an "interval timer" peripheral could be necessary to do this. Therefore, I recently added an "interval timer" inside of the Nios II system, and this hence lead to some changes upon the corresponding .sopcinfo and .qsys files. The FPGA was compiled successfully, but files in bladerf_nios_bsp were not updated, and I tried to generate a new BSP regarding the changes in Nios II via Nios II Eclipse SBT, but Eclipse showed me an error message:

Error executing 'nios2-bsp-generate-files --bsp-dir . --settings settings.bsp', unexpected return code 1.
Error message:
SEVERE: settings.bsp
SEVERE: nios2-bsp-generate-files failed.

The board I am currently using is: BladeRF2.0 Micro- XA4; OS of the PC: Windows 11. Software versions: Quartus Prime 17.1 and its built-in Eclipse for Nios II SBT.

Are there anything wrong I did during building the FPGA? Can anyone help? Many thanks in advance.

[TobyXue]

You have to check the `settings.bsp` file, the installed components, the FPGA bitstream,pokedoku and clean and rebuild the project.

Thank you for the advice, it has been resolved.

[paulhenge]

You have to check the `settings.bsp` file, the installed components, the FPGA bitstream, clean and rebuild the project.

Absolutely correct, the steps need to be performed completely and sequentially
bad ice cream

[adamusa]

You need to recheck the code lines and reinstall settings.bsp according to the instructions to fix the problem. slither io

[interviewwidow]

I've tried to generate BSP using NIOS II 11.1 SBT for Eclipse (right click project ->NIOS II -> Generate BSP),dinosaur game but got the following.

[anniesteuber]

Before generating a new BSP, try cleaning and rebuilding your project. This can help ensure that all necessary files are up to date. In Eclipse, you can go to "Project" > "Clean" and select your project to clean and rebuild it. Hello Neighbor

[deniolps]

Before generating a new BSP, try cleaning and rebuilding your project. This can help ensure that all necessary files are up to date. In Eclipse, you can go to "Project" > "Clean" and select your project to clean and rebuild itbackrooms game

I tried but it didn't work.