Error flashing firmware
Posted: Fri Sep 06, 2013 2:04 am
I have my bladeRF now recognized both in Windows (Win7-64) and Linux (Mint Linux under VirtualBox), and am trying to update the firmware via bladeRF-cli. I have the tool built successfully, but I get essentially the same error in both cases.
Windows:
Linux:
I had to use sudo, else I got other LibUSB errors. Any ideas as to what's going on? I'll try out another machine soon, but I haven't had any other problems with this machine. It's only USB 2.0, but I'd think that should still work.
Windows:
Code: Select all
>bladeRF-cli.exe -p
[ERROR] Failed to retrieve serial number
Backend: libusb
Serial:
USB Bus: 2
USB Address: 5
>bladeRF-cli.exe -f latest.img
[INFO] Found a bladeRF
[ERROR] Failed to retrieve serial number
[INFO] Claimed all inferfaces successfully
********************************************************************************
* ENTERING LEGACY MODE, PLEASE UPGRADE TO THE LATEST FIRMWARE BY RUNNING:
* wget http://nuand.com/fx3/latest.img ; bladeRF-cli -b -f latest.img
********************************************************************************
Flashing firmware...
[INFO] Legacy change to interface 2
[INFO] Erasing 3 sectors starting @ sector 0
[ERROR] Failed to erase sector 0
[ERROR] Received erase failure status from FX3.
Error: failed to flash firmware: File or device I/O failure
Could not flash firmware
Code: Select all
>sudo ./bladeRF-cli -p
[ERROR] Failed to retrieve serial number
Backend: libusb
Serial:
USB Bus: 1
USB Address: 2
>sudo ./bladeRF-cli -b -f ~/Code/bladeRF/latest.img
[INFO] Found a bladeRF
[ERROR] Failed to retrieve serial number
[INFO] Claimed all inferfaces successfully
********************************************************************************
* ENTERING LEGACY MODE, PLEASE UPGRADE TO THE LATEST FIRMWARE BY RUNNING:
* wget http://nuand.com/fx3/latest.img ; bladeRF-cli -b -f latest.img
********************************************************************************
Flashing firmware...
[INFO] Legacy change to interface 2
[INFO] Erasing 3 sectors starting @ sector 0
[ERROR] Failed to erase sector 0
[ERROR] Received erase failure status from FX3.
Error: failed to flash firmware: File or device I/O failure
Could not flash firmware