BladeRF 2.0 with YateBTS

Discussions related to embedded firmware, driver, and user mode application software development
Post Reply
JoeRF
Posts: 1
Joined: Fri Feb 01, 2019 9:52 am

BladeRF 2.0 with YateBTS

Post by JoeRF »

Hey Guys,

I need your assistance. We bought the BladeRF 2.0 A9 for our Lab for a IoT Pentest Setup with YateBTS.

We followed strictly the Information from this thread viewtopic.php?f=5&t=5094#p9358 but never got one of our iphones connected. We can see the network but a connection attemp fails. After several recompiling of yate, libs and test with different fx3 and fpgas - we have no clue.


The attached logfile was created with "-vvvv" and this version:

bladeRF> version

bladeRF-cli version: 1.7.0-git-6b659c2d
libbladeRF version: 2.1.0-git-6b659c2d

Firmware version: 2.2.0-git-3d38fac2
FPGA version: 0.8.0

The system is a Ubuntu 18.04 build on bare metal - no virtualization involved.

https://ufile.io/klvj4

Thanks for your assistance!
Mcalpine
Posts: 1
Joined: Thu Mar 14, 2019 3:33 am

Re: BladeRF 2.0 with YateBTS

Post by Mcalpine »

Does your guide work regardless of the version of Ubuntu?
Post Reply