Hello Nuand staff.
I bought a bladerf around 10 years ago and I lost the cables but have 2 or 3 boards. Can I begin with buying some cables?
Now unfortunately, when I last attempted to use the system, I had trouble getting it to boot on Windows. It might be possible to use a Linux box but I want to try using it on my main system Windows 11.
Please write back ASAP,
Bruce
Getting back on board!
-
- Posts: 156
- Joined: Thu Feb 28, 2013 11:14 pm
Re: Getting back on board!
Welcome back!
We no longer have USB 3.0 micro cables for sale, however pretty much any such cable from a reputable vendor on Amazon (or similar) should be good.
The bladeRF's firmware will likely have to be upgrade from the version 1.0 that's on there. Please take a look at the step by step process described here: https://github.com/Nuand/bladeRF/wiki/U ... ery_Method
We no longer have USB 3.0 micro cables for sale, however pretty much any such cable from a reputable vendor on Amazon (or similar) should be good.
The bladeRF's firmware will likely have to be upgrade from the version 1.0 that's on there. Please take a look at the step by step process described here: https://github.com/Nuand/bladeRF/wiki/U ... ery_Method
-
- Posts: 2
- Joined: Tue Dec 12, 2023 9:56 pm
Re: Getting back on board!
I think that the cable is another spec. Do you know what it would be?
Bruce
Bruce