Hi all,
I would like to know if it is possible, from the libbladerf library, to detect the presence (or absence) of a clock connected to the SMB port.
I thought it would be possible to use "bladerf_get_smb_frequency" after setting "bladerf_set_smb_mode(bladeRFdev, BLADERF_SMB_MODE_INPUT)", but the value returned is always 0.
Let me know if there is a way to do this, I would like to report an error to the user when no clock is connected.
I'm using release 2016.06.
Regards,
Serge
Detecting External Clock on SMB
-
- Posts: 14
- Joined: Tue Nov 03, 2015 1:50 pm
- Location: Montreal, Qc, Canada
- Contact:
Detecting External Clock on SMB
--------------------------------------------------------------------------------
Serge Malo
CDO & Co-founder, Skydel Solutions
www.skydelsolutions.com
Twitter: @skydelsol
Serge Malo
CDO & Co-founder, Skydel Solutions
www.skydelsolutions.com
Twitter: @skydelsol