BladeRF + osmocom

Discussions related to embedded firmware, driver, and user mode application software development
Post Reply
traspjohn
Posts: 3
Joined: Mon Oct 15, 2018 8:33 am

BladeRF + osmocom

Post by traspjohn »

Can someone tell if it's actualy possible to run a GSM/GPRS Network with BladeRF and Osmocom software(osmoNITB, osmoGGSN, etc..)?
bglod
Posts: 201
Joined: Thu Jun 18, 2015 6:10 pm

Re: BladeRF + osmocom

Post by bglod »

YateBTS currently works with the bladeRF x115 and x40, provided you are using FPGA v0.1.2. The folks over at Yate are completely rewriting their support for bladeRF so when it's eventually released, it will link against libbladeRF and you'll no longer be tied to specific FPGA/firmware versions. That's really all I know about this topic, unfortunately.
Electrical Engineer
Nuand, LLC.
traspjohn
Posts: 3
Joined: Mon Oct 15, 2018 8:33 am

Re: BladeRF + osmocom

Post by traspjohn »

ty for reply, i'm waiting for someone that could help me.
This is lack of feature, maybe from osmocom not from nuand.

Best regards
John
bglod
Posts: 201
Joined: Thu Jun 18, 2015 6:10 pm

Re: BladeRF + osmocom

Post by bglod »

I'm not sure if you saw this, but we have an unofficial YateBTS that supports bladeRF2: http://nuand.com/forums/viewtopic.php?f=5&t=5094
Electrical Engineer
Nuand, LLC.
Post Reply