Nios2DebugException: Target is broken and needs to be reset
Posted: Sun Nov 29, 2020 2:10 pm
Hi there,
i need to implement an synthesizer, which should be controlled by the fpga. We bought the bladerf-micro thinking, that this interface would be doable at the expansion port.
Unfortunately, it has been everything ..but easy.
With a lot of trouble, I did until the compilation of the compilation of the build_bladerf.sh and the compilation of the software in eclipse.
The next step consisted on configuring a SPI module in the Qsys/Platform Designer, which is went smoothly.
However, the debugging/running of this new module on eclipse seems to be impossible, with the current hardware configuration.
Basically, the two possible ways to debug in NIOS lead me to nowhere:
-Trying NIOS II Hardware ends up killing Quartus, because eclipse freezes
-Trying NIOS II Hardware beta pops up Nios2DebugException: Target is broken and needs to be reset,
After Days:Hours:Minutes of googling , it seem that something on bladeRF-micro hardware interference with the JTAG reset…. I guess..
I appreciate any comment or ideas
i need to implement an synthesizer, which should be controlled by the fpga. We bought the bladerf-micro thinking, that this interface would be doable at the expansion port.
Unfortunately, it has been everything ..but easy.
With a lot of trouble, I did until the compilation of the compilation of the build_bladerf.sh and the compilation of the software in eclipse.
The next step consisted on configuring a SPI module in the Qsys/Platform Designer, which is went smoothly.
However, the debugging/running of this new module on eclipse seems to be impossible, with the current hardware configuration.
Basically, the two possible ways to debug in NIOS lead me to nowhere:
-Trying NIOS II Hardware ends up killing Quartus, because eclipse freezes
-Trying NIOS II Hardware beta pops up Nios2DebugException: Target is broken and needs to be reset,
After Days:Hours:Minutes of googling , it seem that something on bladeRF-micro hardware interference with the JTAG reset…. I guess..
I appreciate any comment or ideas