Hi,
I have a micro 2 ax5 and I need to enable the bias tee voltage on channel 2. I'm using GRC with the soapy custom sink. Any advice on what string and where to put the string?
Thanks in advance!
Wayne Hilliard
biastee settings
-
- Posts: 156
- Joined: Thu Feb 28, 2013 11:14 pm
Re: biastee settings
Hi Wayne,
Please try adding bladerf=0,biastee=1 in the GRC gr-osmosdr block. Alternatively, please take a look at gr-bladeRF, which has an option directly for enabling the bias tee.
Regards,
Rob
Please try adding bladerf=0,biastee=1 in the GRC gr-osmosdr block. Alternatively, please take a look at gr-bladeRF, which has an option directly for enabling the bias tee.
Regards,
Rob
-
- Posts: 1
- Joined: Tue Mar 28, 2023 7:44 am
Re: biastee settings
How to add "'biastee=rx” to gr-osmosdr source blocks if I install gr-osmodr with this way:
pybombs -p bladeRF install bladeRF gr-iqbal gr-osmosdr gqrx
?
pybombs -p bladeRF install bladeRF gr-iqbal gr-osmosdr gqrx
?
Last edited by Raf on Tue Mar 28, 2023 10:39 am, edited 1 time in total.
-
- Posts: 156
- Joined: Thu Feb 28, 2013 11:14 pm
Re: biastee settings
"biastee=rx" can be added to the "device string" when double clicking the gr-osmosdr blocks.