Use bt-100 with bladeRF
-
mitesh
- Posts: 7
- Joined: Tue Jun 13, 2023 1:33 am
Use bt-100 with bladeRF
I want to ask how to use bt-100 power amplifier with bladeRF? cause when i try to enable it is enabling but not working for transmission of signal and in GRC when i run the flowgraph i get error like No devices available(-7).
-
jumlouh
- Posts: 1
- Joined: Mon Jan 08, 2024 2:03 am
Re: Use bt-100 with bladeRF
Wow, the error is exactly the same as the one I encounteredgeometry dash lite Does anyone have any solution?
-
robert.ghilduta
- Posts: 156
- Joined: Thu Feb 28, 2013 11:14 pm
Re: Use bt-100 with bladeRF
Please check dmesg to see if there are any power limit issues. If the bladeRF 2.0 is running on USB 2.0 it may not be able to request enough power.
Otherwise, "No Device Available" is a sign that bladeRF-cli (or another program) is using the deivce. Please ensure you exit bladeRF-cli; the bias-tee setting will not carry over to GNURadio. You will have to set "bladerf=0,biastee=tx" in the device string in gr-osmosdr. Or if you're using gr-bladeRF, please ensure to enable Bias-Tee in the sink block.
Otherwise, "No Device Available" is a sign that bladeRF-cli (or another program) is using the deivce. Please ensure you exit bladeRF-cli; the bias-tee setting will not carry over to GNURadio. You will have to set "bladerf=0,biastee=tx" in the device string in gr-osmosdr. Or if you're using gr-bladeRF, please ensure to enable Bias-Tee in the sink block.