Synchronization of TX and RX Signals in BladeRF 2.0 xA9
Posted: Thu Apr 18, 2024 4:37 am
I want to implement a FMCW or a pulsed radar using a SDR I tried using Pluto sdr but that does not have any synchronization mechanisms, I do have a BladeRF in my laboratory and I saw that in the API to control the bladeRF there is a bladerf_sync_config(), bladerf_sync_rx(), bladerf_sync_tx() functions. So, I wanted to know that if I use these functions in my code then will the TX and the RX signals be tine synchronized.
I have put up a similar question in the bladerf github issues.
I have put up a similar question in the bladerf github issues.