GPIO Standoff measurements

Having issues with the site, hardware, source code, or any other issues?
Post Reply
gaprice2354
Posts: 10
Joined: Sun Apr 20, 2014 8:22 am

GPIO Standoff measurements

Post by gaprice2354 »

Hi

Does anyone know the proper standoffs to mount the GPIO board to the bladerf main board?

Thanks
Top
robert.ghilduta
Posts: 156
Joined: Thu Feb 28, 2013 11:14 pm

Re: GPIO Standoff measurements

Post by robert.ghilduta »

The average mounting height should be 0.197" according to BTH-030-01-F-D-A's datasheet http://www.samtec.com/ftppub/pdf/BTH.PDF .
Using a micrometer, I just measured a height of 0.200".
Top
piranha32
Posts: 26
Joined: Fri Mar 01, 2013 6:25 am

Re: GPIO Standoff measurements

Post by piranha32 »

Looks like 5mm standoffs should be fine.
Top
Post Reply

Return to “Troubleshooting”