Page 1 of 1
USB Not Recognised
Posted: Fri Jun 27, 2014 2:55 pm
by bnt2025
Hello,
My desktop cut out while flashing firmware to my BladeRF, now nothing is recognising it as a proper device. Not Windows or even Ubuntu.
I have tried connection a jumper to j64, but it is still shown as an unknown device.
Any recommendations?
Thanks
Re: USB Not Recognised
Posted: Sat Jul 12, 2014 2:56 am
by bnt2025
When I plug it in to my computer I get this error message over and over;
[54433.262883] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[54433.334813] usb 1-1.4: device descriptor read/64, error -32
[54433.510636] usb 1-1.4: device descriptor read/64, error -32
[54433.686468] usb 1-1.4: new full-speed USB device number 6 using ehci-pci
[54433.758395] usb 1-1.4: device descriptor read/64, error -32
[54433.934224] usb 1-1.4: device descriptor read/64, error -32
[54434.110053] usb 1-1.4: new full-speed USB device number 7 using ehci-pci
[54434.517552] usb 1-1.4: device not accepting address 7, error -32
[54434.589584] usb 1-1.4: new full-speed USB device number 8 using ehci-pci
Really hope it can be recovered.
Re: USB Not Recognised
Posted: Sat Jul 12, 2014 10:38 am
by bpadalino
Are you trying the same USB port, or a different one?
Coming up as a full speed device over EHCI sounds like a pretty terrible thing.
Have you tried a different cable?
Re: USB Not Recognised
Posted: Mon Aug 18, 2014 2:14 am
by bnt2025
Sorry for the massive delay,
but yes the dmesg is the same for bout USB 2 and 3. Below I have pasted in the results.
USB 3 without J64 attached
Code: Select all
[ 5511.272336] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[ 5511.272539] usb 3-2: Device not responding to set address.
[ 5511.476452] usb 3-2: Device not responding to set address.
[ 5511.680257] usb 3-2: device not accepting address 3, error -71
[ 5511.792328] usb 3-2: new full-speed USB device number 4 using xhci_hcd
[ 5511.792502] usb 3-2: Device not responding to set address.
[ 5511.996404] usb 3-2: Device not responding to set address.
[ 5512.200206] usb 3-2: device not accepting address 4, error -71
[ 5512.312258] usb 3-2: new full-speed USB device number 5 using xhci_hcd
[ 5512.312432] usb 3-2: Device not responding to set address.
[ 5512.516404] usb 3-2: Device not responding to set address.
[ 5512.720168] usb 3-2: device not accepting address 5, error -71
[ 5512.832285] usb 3-2: new full-speed USB device number 6 using xhci_hcd
[ 5512.832457] usb 3-2: Device not responding to set address.
[ 5513.036386] usb 3-2: Device not responding to set address.
[ 5513.240202] usb 3-2: device not accepting address 6, error -71
USB 2 without J64 attached
Code: Select all
[ 5573.577977] usb 3-4: new full-speed USB device number 7 using xhci_hcd
[ 5573.578083] usb 3-4: Device not responding to set address.
[ 5573.781978] usb 3-4: Device not responding to set address.
[ 5573.985889] usb 3-4: device not accepting address 7, error -71
[ 5574.377896] usb 3-4: new full-speed USB device number 9 using xhci_hcd
[ 5574.378072] usb 3-4: Device not responding to set address.
[ 5574.581928] usb 3-4: Device not responding to set address.
[ 5574.785800] usb 3-4: device not accepting address 9, error -71
[ 5574.897887] usb 3-4: new full-speed USB device number 10 using xhci_hcd
[ 5574.898073] usb 3-4: Device not responding to set address.
[ 5575.101914] usb 3-4: Device not responding to set address.
[ 5575.305786] usb 3-4: device not accepting address 10, error -71
[ 5575.417860] usb 3-4: new full-speed USB device number 11 using xhci_hcd
[ 5575.418034] usb 3-4: Device not responding to set address.
[ 5575.621943] usb 3-4: Device not responding to set address.
[ 5575.825776] usb 3-4: device not accepting address 11, error -71
[ 5575.937845] usb 3-4: new full-speed USB device number 12 using xhci_hcd
[ 5575.938018] usb 3-4: Device not responding to set address.
[ 5576.142040] usb 3-4: Device not responding to set address.
[ 5576.345780] usb 3-4: device not accepting address 12, error -71
USB 2 with J64 attached
Code: Select all
[ 5861.362745] usb 3-4: new full-speed USB device number 14 using xhci_hcd
[ 5861.362922] usb 3-4: Device not responding to set address.
[ 5861.566903] usb 3-4: Device not responding to set address.
[ 5861.770706] usb 3-4: device not accepting address 14, error -71
[ 5861.882798] usb 3-4: new full-speed USB device number 15 using xhci_hcd
[ 5861.882995] usb 3-4: Device not responding to set address.
[ 5862.086760] usb 3-4: Device not responding to set address.
[ 5862.290592] usb 3-4: device not accepting address 15, error -71
[ 5862.402620] usb 3-4: new full-speed USB device number 16 using xhci_hcd
[ 5862.402792] usb 3-4: Device not responding to set address.
[ 5862.606749] usb 3-4: Device not responding to set address.
[ 5862.810575] usb 3-4: device not accepting address 16, error -71
[ 5862.922686] usb 3-4: new full-speed USB device number 17 using xhci_hcd
[ 5862.922865] usb 3-4: Device not responding to set address.
[ 5863.126733] usb 3-4: Device not responding to set address.
[ 5863.330609] usb 3-4: device not accepting address 17, error -71
[ 5902.293155] usb 3-2: new full-speed USB device number 18 using xhci_hcd
USB 3 with J64 attached
Code: Select all
[ 5902.293336] usb 3-2: Device not responding to set address.
[ 5902.497131] usb 3-2: Device not responding to set address.
[ 5902.701060] usb 3-2: device not accepting address 18, error -71
[ 5902.997134] usb 3-2: new full-speed USB device number 20 using xhci_hcd
[ 5902.997314] usb 3-2: Device not responding to set address.
[ 5903.201178] usb 3-2: Device not responding to set address.
[ 5903.405029] usb 3-2: device not accepting address 20, error -71
[ 5903.517143] usb 3-2: new full-speed USB device number 21 using xhci_hcd
[ 5903.517337] usb 3-2: Device not responding to set address.
[ 5903.721237] usb 3-2: Device not responding to set address.
[ 5903.925062] usb 3-2: device not accepting address 21, error -71
[ 5904.037130] usb 3-2: new full-speed USB device number 22 using xhci_hcd
[ 5904.037317] usb 3-2: Device not responding to set address.
[ 5904.241226] usb 3-2: Device not responding to set address.
[ 5904.445049] usb 3-2: device not accepting address 22, error -71
[ 5904.557115] usb 3-2: new full-speed USB device number 23 using xhci_hcd
[ 5904.557310] usb 3-2: Device not responding to set address.
[ 5904.761164] usb 3-2: Device not responding to set address.
[ 5904.965021] usb 3-2: device not accepting address 23, error -71
Could a corrupted firmware image cause this?
Thanks again
Re: USB Not Recognised
Posted: Tue Aug 19, 2014 3:03 am
by bnt2025
Yes I have tested it on my desktop and laptop (the last set of results were my laptop)
I will install the GNU Radio Live DVD on an other laptop. to see if I can get any better results.
What version do I need of J Link I have found a few on Farnell, such as the 8.08.90, the 8.08.00.
Thanks
Re: USB Not Recognised
Posted: Tue Aug 26, 2014 1:31 pm
by bnt2025
Thank you for your suggestion. I have emailed the support address you supplied.
I will update when I hear back from them
Many thank
Re: USB Not Recognised
Posted: Tue Aug 26, 2014 11:35 pm
by bnt2025
Yes, the device was never plugged in during boot.
Thanks