when i load fpga v0.0.3 on bladerf bluescreen appear
plz help
bluescreen problem
-
soshini
- Posts: 5
- Joined: Mon Feb 10, 2014 12:39 am
Re: bluescreen problem
excuse me
when i flash fx3 with fw 1.6.1 this happens(bladeRF-cli -f bladeRF_fw_v1.6.1.img)
but when i use interactive mode to flash (load fx3 bladeRF_fw_v1.6.1.img) it works without problem
bladeRF-cli version: 0.10.3-git
libbladeRF version: 0.12.1-git
windows 7 64 bit ultimate
i use usb2 port
when i flash fx3 with fw 1.6.1 this happens(bladeRF-cli -f bladeRF_fw_v1.6.1.img)
but when i use interactive mode to flash (load fx3 bladeRF_fw_v1.6.1.img) it works without problem
bladeRF-cli version: 0.10.3-git
libbladeRF version: 0.12.1-git
windows 7 64 bit ultimate
i use usb2 port
-
robert.ghilduta
- Posts: 168
- Joined: Thu Feb 28, 2013 11:14 pm
Re: bluescreen problem
Thanks for reporting this, I was finally able to reproduce and fix it. The Windows installer should now have this fix as well.
You can find out more about the fix at https://github.com/Nuand/bladeRF/commit ... 84fe938c3c
You can find out more about the fix at https://github.com/Nuand/bladeRF/commit ... 84fe938c3c
-
yoshimifuj
- Posts: 15
- Joined: Wed May 07, 2014 8:59 pm
Re: bluescreen problem
I experienced bluescreen with Windows8.1 Professional x64
bladeRF> version
bladeRF-cli version: 0.10.3-git
libbladeRF version: 0.12.1-git
Error: File or device I/O failure
Windows' bluescreen said 'WDF_VIOLATION'.
bladeRF> version
bladeRF-cli version: 0.10.3-git
libbladeRF version: 0.12.1-git
Error: File or device I/O failure
Windows' bluescreen said 'WDF_VIOLATION'.
-
yoshimifuj
- Posts: 15
- Joined: Wed May 07, 2014 8:59 pm
Re: bluescreen problem
Jon,
It happened when I was flashing the firmware.
I'm using the latest version of the firmware.
I can't re-produce it today.
Yoshimi
It happened when I was flashing the firmware.
I'm using the latest version of the firmware.
I can't re-produce it today.
Yoshimi