I’ve installed the bladerf_win_installer and when I start the CLI I get this error message:
Failed to open device ((null)): Misaligned flash access
Does any know how I can fix this problem?
Thanks
Sukkin
M1AFD
[Solved] Misaligned flash access problem
-
M1AFD
- Posts: 2
- Joined: Fri Mar 07, 2014 4:23 pm
Re: Misaligned flash access problem
Hi Jon,
I think I had an Windows 7 installation problem. I ticked the Upgrade firmware checkbox and during the firmware upgrade the progress bar didn't really move and it just said finished.
I had to use Force Cypress Bootloader. That didn't work at first because I was using the USB 3 cable. After changing it to an USB2 cable the firmware upgraded ok. I loaded the fpga and the SDR-Radio.
The fun now starts.
Many thanks for your help.
Sukkin
M1AFD
I think I had an Windows 7 installation problem. I ticked the Upgrade firmware checkbox and during the firmware upgrade the progress bar didn't really move and it just said finished.
I had to use Force Cypress Bootloader. That didn't work at first because I was using the USB 3 cable. After changing it to an USB2 cable the firmware upgraded ok. I loaded the fpga and the SDR-Radio.
The fun now starts.
Many thanks for your help.
Sukkin
M1AFD