Compatibility with latest SDR#

Discussions related to embedded firmware, driver, and user mode application software development

Moderator: robert.ghilduta

Post Reply
ykhaled
Posts: 8
Joined: Sat Jun 11, 2016 8:38 pm

Compatibility with latest SDR#

Post by ykhaled » Fri Dec 22, 2017 4:20 pm

Hi all, do you know if BladeRF works with the latest SDR#? I've been trying but no luck - I must be missing something.


1- Downloaded: https://github.com/jmichelp/sdrsharp-bl ... s/tag/v0.3
2- Downloaded latest x86 SDR# from AirSpy and extracted all contents to program files x86. Tested with Audio card and it works.
3- Extracted all files from (1) to the same folder in (2)
4- Added the following line to frontEnds
<add key="BladeRF" value="SDRSharp.BladeRF.BladeRFIO,SDRSharp.BladeRF" />
5- Installed BladeRF driver via the Windows Installer

I launch the application but its not showing up in the sources (front-ends).
I'm running Windows 10 pro Dot Net 4.6.2

6- Now I tried copying the contents of c:/Program files/bladeRF/x86 to SDR# root folder - same issue

jump
Posts: 58
Joined: Mon Mar 03, 2014 5:31 pm
Contact:

Re: Compatibility with latest SDR#

Post by jump » Mon Mar 26, 2018 3:50 pm

Hi,

something's broken in the wrapper. I'm working on a fix and will release a new version as soon as I can.

nipunamr
Posts: 21
Joined: Sat Sep 08, 2018 2:05 pm

Re: Compatibility with latest SDR#

Post by nipunamr » Thu Sep 13, 2018 12:52 pm

I got it to work eventually after trying it for about a week

EmilK
Posts: 8
Joined: Sun Nov 18, 2018 12:57 pm

Re: Compatibility with latest SDR#

Post by EmilK » Sun Dec 02, 2018 4:52 am

Got an x40+xb200 combo just a few days ago.
I tried everything in different programs but I can't get the thing running (except in SDR Angel).

1. SDR Sharp.
Blade is not even listed even if the dll and the magic line are inserted.

2. SDR Console 2 and 3 are telling me no device found when I select in the dropbox bladerf.....

SDR Angel, blade runs without problems and so can I exclude a hardware error.
CAn someone explain a little bit better how to connect x40 and xb-200? I want to use it for general signal search. Also how can I define the converter in SDR Console if SDR Console can drive the device?

Thank you for your time
Emil

robert.ghilduta
Posts: 39
Joined: Thu Feb 28, 2013 11:14 pm

Re: Compatibility with latest SDR#

Post by robert.ghilduta » Fri Dec 07, 2018 3:12 am

Quick note, if you are running the bladeRF 2.0 micro use our fork of the SDR# plugin: https://github.com/Nuand/sdrsharp-bladerf the link comes with precompiled binaries.
If you are using an earlier generation bladeRF please use the original https://github.com/jmichelp/sdrsharp-bl ... s/tag/v0.3 SDR# repo.

Quick note about SDR#, I've avoided having to battle UAC by unzipping things to my home directory.

EmilK
Posts: 8
Joined: Sun Nov 18, 2018 12:57 pm

Re: Compatibility with latest SDR#

Post by EmilK » Fri Dec 07, 2018 9:43 am

Robert thanks for your answer,
as I stated in my query I have an X40+ xb200 combo but in SDR is not even listed.
Strange is that SDR Console v3 (latest version) can drive the X40 when I select the bladerf v2 as receiver type. When I set it to ver. 1 then I go "no device found" message.....

Post Reply