[Solved] Installation issue on Windows 7

[santoshseran]

Hi,

I am trouble installing the windows 7.I followed the instruction given at http://www.scan-ne.net/bladerf/bladerfwin7.html. I am getting the no devices attached while running the bladeRF-CLi. I tried it on both USB 3.0 and Uwb 2.0. Any help with this issue is appreciated.

Thanks
Santosh

[santoshseran]

Hi Jynik,

The output of the command

C:\Program Files (x86)\bladeRF\x86>bladeRF-cli.exe -i -v verbose
[VERBOSE] Using libusb version: <= 1.0.9
[VERBOSE] Non-bladeRF device found: VID 8086, PID 1e26
[VERBOSE] Non-bladeRF device found: VID 8086, PID 1e2d
[VERBOSE] Non-bladeRF device found: VID 046d, PID c52b
[VERBOSE] Non-bladeRF device found: VID 04b4, PID 00f3
[DEBUG] Couldn't populate devinfo - LIBUSB_ERROR_NOT_SUPPORTED
[DEBUG] Could not open FX3 bootloader device: LIBUSB_ERROR_NOT_SUPPORTED
[VERBOSE] Non-bladeRF device found: VID 04f2, PID b2ea
[VERBOSE] Non-bladeRF device found: VID 0a5c, PID 21e6
[VERBOSE] Non-bladeRF device found: VID 147e, PID 2020
[VERBOSE] Non-bladeRF device found: VID 8087, PID 0024
[VERBOSE] Non-bladeRF device found: VID 8087, PID 0024
[VERBOSE] Non-bladeRF device found: VID 8086, PID 1e31
[DEBUG] No devices available on the libusb backend.
No device(s) attached.
bladeRF>


The device does show up in the device manager. Attached here is the image of the device manager.

The machine that i am using is 64 bit machine (Thinkpad W530) with 32GB Ram Intet i7-3630QM processor. The host USB Controller is
Intel® USB 3.0 eXtensible Host Controller

Thanks
Santosh

[santoshseran]

Hi Jon,

It worked. Thanks.

I am currently planning to build a radar and I am new to bladeRf. I need suggestions on how to get started for programming bladerf.

Thanks
Santosh